검색결과
-
[특집-기술위원회] TC 211 - 지리정보/지리학(Geographic information/Geomatics)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~107 △1963년 TC 108~111 △1964년 TC 112~115, TC 117 △1965년 TC 118 △1966년 TC 119~122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146~150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~161 △1975년 TC 162~164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171~174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~186 △1984년 TC 188 △1985년 TC 189~191 △1988년 TC 192~194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 △1992년 TC 204~206 △1993년 TC 209 등이 있다.ISO/TC 211지리정보/지리학(Geographic information/Geomatics)과 관련된 기술위원회는 TC 210과 마찬가지로 1994년 결성됐다. 사무국은 스웨덴 국립표준청(Svenska institutet för standarder, SIS)에서 맡고 있다.위원회는 마츠 올린(Mr Mats Åhlin)가 책임지고 있다. 현재 의장은 피터 파슬로(Mr Peter Parslow)이며 임기는 2024년말까지다. ISO 기술 프로그램 관리자는 하킴 음킨시(Mr Hakim Mkinsi), ISO 편집 관리자는 앨리슨 레이드 자몬드(Ms Alison Reid-Jamond) 등이다.범위는 디지털 지리정보 분야의 표준화다. 지구와 관련된 위치와 직간접적으로 연관된 물체나 현상에 관한 정보에 대한 구조화된 표준 세트 확립을 목표로 하고 있다.지리 정보의 범위 내에서 이러한 표준은 데이터 관리를 위한 방법, 도구 및 서비스를 지정할 수 있다. 데이터 관리는 사용자 및 시스템을 위한 데이터 획득, 처리, 분석, 접근, 제시 및 출판이 포함된다.이 작업은 가능한 경우 정보 기술 및 데이터에 대한 적절한 표준과 연결되어야 하며 지리 데이터를 사용하는 부문별 응용 프로그램 개발을 위한 프레임워크를 제공해야 된다.현재 ISO/TC 211 사무국의 직접적인 책임 하에 발행된 표준은 97개며 ISO/TC 211 사무국의 직접적인 책임 하에 개발 중인 표준은 26개다. 참여하고 있는 회원은 38개국, 참관 회원은 35개국이다.□ ISO/TC 211 사무국의 직접적인 책임 하에 발행된 표준 97개 중 15개 목록▷ISO 6709:2022 Standard representation of geographic point location by coordinates▷ISO 19101-1:2014 Geographic information — Reference model — Part 1: Fundamentals▷ISO 19101-2:2018 Geographic information — Reference model — Part 2: Imagery▷ISO 19103:2015 Geographic information — Conceptual schema language▷ISO 19104:2016 Geographic information — Terminology▷ISO 19105:2022 Geographic information — Conformance and testing▷ISO 19106:2004 Geographic information — Profiles▷ISO 19107:2019 Geographic information — Spatial schema▷ISO 19108:2002 Geographic information — Temporal schema▷ISO 19108:2002/Cor 1:2006 Geographic information — Temporal schema — Technical Corrigendum 1▷ISO 19109:2015 Geographic information — Rules for application schema▷ISO 19110:2016 Geographic information — Methodology for feature cataloguing▷ISO 19111:2019 Geographic information — Referencing by coordinates▷ISO 19111:2019/Amd 1:2021 Geographic information — Referencing by coordinates — Amendment 1▷ISO 19111:2019/Amd 2:2023 Geographic information — Referencing by coordinates — Amendment 2□ ISO/TC 211 사무국의 직접적인 책임 하에 개발 중인 표준 26개 중 15개 목록▷ISO/DIS 19103 Geographic information — Conceptual schema language▷ISO/CD 19109 Geographic information — General feature model and rules for application schema▷ISO/AWI TR 19115-4 Geographic information – Metadata — Part 4: JSON schema implementation of metadata fundamentals▷ISO/DIS 19116 Geographic information — Positioning services▷ISO/AWI TR 19121 Geographic information — Imagery and gridded data▷ISO/AWI 19123-2 Geographic information — Schema for coverage geometry and functions — Part 2: Coverage implementation schema▷ISO/AWI TS 19123-4 Geographic information — Schema for coverage geometry and functions — Part 4: Tiling Schema▷ISO/AWI TS 19124-2 Geographic information — Calibration and validation of remote sensing data and derived products — Part 2: SAR▷ISO/AWI 19127 Geographic information — Geodetic register▷ISO/AWI TS 19130-2 Geographic information — Imagery sensor models for geopositioning — Part 2: SAR, InSAR, lidar and sonar▷ISO/CD 19135 Geographic information registration — Requirements▷ISO/DTS 19144-3 Geographic information — Classification systems — Part 3: Land Use Meta Language (LUML)▷ISO/DIS 19152-2 Geographic information — Land Administration Domain Model (LADM) — Part 2: Land registration▷ISO/FDIS 19152-3 Geographic information — Land Administration Domain Model (LADM) — Part 3: Marine georegulation▷ISO/DIS 19152-4 Geographic information — Land Administration Domain Model (LADM) — Part 4: Valuation information
-
[특집-기술위원회] TC 201 - 표면 화학 분석(Surface chemical analysis)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186 △1984년 TC 188 △1985년 TC 189, TC 190, TC 191 △1988년 TC 192~TC 194 △1989년 TC 195 △1990년 TC 197, TC 198 등이 있다.ISO/TC 201 표면 화학 분석(Surface chemical analysis)과 관련된 기술위원회는 TC 199와 마찬가지로 1991년 결성됐다. 사무국은 일본 산업표준조사회(日本産業標準調査会, Japanese Industrial Standards Committee, JISC)에서 맡고 있다.위원회는 사토시 곤다(Dr Satoshi Gonda)가 책임지고 있다. 현재 의장은 히데히코 노나카(Dr Hidehiko Nonaka)이다.ISO 기술 프로그램 관리자는 주안우 주(Ms Chuanyu Zou), ISO 편집 관리자는 아룬 ABY 파라에카티(Mr Arun ABY Paraecattil) 등이다.범위는 표면 화학 분석 분야의 표준화다. 표면 화학 분석에는 전자, 이온, 중성 원자 또는 분자, 광자의 빔이 시료 재료에 입사되어 산란되거나 방출된 전자, 이온, 중성 원자 또는 분자, 광자가 감지되는 분석 기술이 포함된다.또한 표면 위로 스캔하는 조사 및 표면 관련 신호를 감지하는 기술도 포함하지만 ISO/TC 202의 범위 내에 있는 주사전자현미경은 제외한다.참고로 현재 표면 화학 분석 기술을 사용하면 분석 정보는 표면에서 가까운 영역(일반적으로 20 nm 이내)의 정보를 얻을 수 있다. 분석 정보 대비 깊이 데이터(analytical information-versus-depth data)는 더 깊은 표면 분석 기술을 사용해 얻을 수 있다.현재 ISO/TC 201 사무국과 관련해 발행된 표준은 81개며 ISO/TC 201 사무국의 직접적인 책임 하에 발행된 표준은 8개다.ISO/TC 201 사무국과 관련해 개발 중인 표준은 22개며 ISO/TC 201 사무국의 직접적인 책임 하에 개발 중인 표준은 2개다. 참여하고 있는 회원은 13개국, 참관 회원은 12개국이다.□ ISO/TC 201 사무국의 직접적인 책임 하에 발행된 표준 8개 목록▷ISO 14706:2014 Surface chemical analysis — Determination of surface elemental contamination on silicon wafers by total-reflection X-ray fluorescence (TXRF) spectroscopy▷ISO 16413:2020 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry — Instrumental requirements, alignment and positioning, data collection, data analysis and reporting▷ISO 17331:2004 Surface chemical analysis — Chemical methods for the collection of elements from the surface of silicon-wafer working reference materials and their determination by total-reflection X-ray fluorescence (TXRF) spectroscopy▷ISO 17331:2004/Amd 1:2010 Surface chemical analysis — Chemical methods for the collection of elements from the surface of silicon-wafer working reference materials and their determination by total-reflection X-ray fluorescence (TXRF) spectroscopy — Amendment 1▷ISO 18337:2015 Surface chemical analysis — Surface characterization — Measurement of the lateral resolution of a confocal fluorescence microscope▷ISO/TS 18507:2015 Surface chemical analysis — Use of Total Reflection X-ray Fluorescence spectroscopy in biological and environmental analysis▷ISO/TR 19693:2018 Surface chemical analysis — Characterization of functional glass substrates for biosensing applications▷ISO 24465:2023 Surface chemical analysis — Determination of the minimum detectability of surface plasmon resonance device□ ISO/TC 201 사무국의 직접적인 책임 하에 개발 중인 표준 2개 목록▷ISO/AWI TR 4550 SCA –Surface chemical analysis of bacteria and biofilms▷ISO/FDIS 23124 Surface chemical analysis — Measurement of lateral and axial resolutions of a Raman microscope□ ISO/TC 201 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 201/SC 1 Terminology ; 발행된 표준 3개, 개발 중인 표준 0개▷ISO/TC 201/SC 2 General procedures ; 발행된 표준 9개, 개발 중인 표준 2개▷ISO/TC 201/SC 3 Data management and treatment ; 발행된 표준 5개, 개발 중인 표준 1개▷ISO/TC 201/SC 4 Depth profiling ; 발행된 표준 6개, 개발 중인 표준 0개▷ISO/TC 201/SC 6 Secondary ion mass spectrometry ; 발행된 표준 12개, 개발 중인 표준 2개▷ISO/TC 201/SC 7 Electron spectroscopies ; 발행된 표준 23개, 개발 중인 표준 5개 ▷ISO/TC 201/SC 8 Glow discharge spectroscopy ; 발행된 표준 6개, 개발 중인 표준 3개▷ISO/TC 201/SC 9 Scanning probe microscopy ; 발행된 표준 8개, 개발 중인 표준 4개▷ISO/TC 201/SC 10 X-ray Reflectometry (XRR) and X-ray Fluorescence (XRF) Analysis ; 발행된 표준 1개, 개발 중인 표준 3개
-
[특집-기술위원회] TC 199 - 기계류 안전(Safety of machinery)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186 △1984년 TC 188 △1985년 TC 189, TC 190, TC 191 △1988년 TC 192~TC 194 △1989년 TC 195 △1990년 TC 197, TC 198 등이 있다.ISO/TC 199 기계류 안전(Safety of machinery)과 관련된 기술위원회는 1991년 결성됐다. 사무국은 독일 표준화기구(Deutsches Institut für Normung e.V., DIN)에서 맡고 있다.위원회는 크리스티안 톰(Mr Dr. rer. nat Christian Thom)가 책임지고 있다. 현재 의장은 오토 괴르네만(Mr Otto Görnemann)이다.ISO 기술 프로그램 관리자는 메르세 페레 에르난데스(Mme Mercè Ferrés Hernández), ISO 편집 관리자는 클라우디아 루에제(Ms Claudia Lueje) 등이다.범위는 ISO/IEC 가이드 51 프레임워크 및 ISO, IEC 기술 위원회와 협력해 용어, 방법론, 보호 장치 및 안전 장치를 통합한 기계 안전에 대한 기본 개념 및 일반 원칙의 표준화다.단, ISO/IEC Guide 51에 정의되어 있고 다른 ISO 또는 IEC 기술 위원회의 작업에서 명시적으로 다루고 있는 제품 안전 표준은 제외한다.현재 ISO/TC 199 사무국의 직접적인 책임 하에 발행된 표준은 45개며 ISO/TC 199 사무국의 직접적인 책임 하에 개발 중인 표준은 9개다. 참여하고 있는 회원은 26개국, 참관 회원은 25개국이다.□ ISO/TC 199 사무국의 직접적인 책임 하에 발행된 표준 45개 중 15개 목록▷ISO Guide 78:2012 Safety of machinery — Rules for drafting and presentation of safety standards▷ISO 11161:2007 Safety of machinery — Integrated manufacturing systems — Basic requirements▷ISO 11161:2007/Amd 1:2010 Safety of machinery — Integrated manufacturing systems — Basic requirements — Amendment 1▷ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction▷ISO 13849-1:2023 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design▷ISO 13849-2:2012 Safety of machinery — Safety-related parts of control systems — Part 2: Validation▷ISO 13850:2015 Safety of machinery — Emergency stop function — Principles for design▷ISO 13851:2019 Safety of machinery — Two-hand control devices — Principles for design and selection▷ISO 13854:2017 Safety of machinery — Minimum gaps to avoid crushing of parts of the human body▷ISO 13855:2010 Safety of machinery — Positioning of safeguards with respect to the approach speeds of parts of the human body▷ISO 13856-1:2013 Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors▷ISO 13856-2:2013 Safety of machinery — Pressure-sensitive protective devices — Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars▷ISO 13856-3:2013 Safety of machinery — Pressure-sensitive protective devices — Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices▷ISO 13857:2019 Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs▷ISO 14118:2017 Safety of machinery — Prevention of unexpected start-up□ ISO/TC 199 사무국의 직접적인 책임 하에 개발 중인 표준 9개 목록▷ISO/AWI 12100 Safety of machinery — General principles for design — Risk assessment and risk reduction▷ISO/DIS 12895 Safety of machinery — Identification of whole body access and prevention of associated risk(s)▷ISO/AWI 13849-2 Safety of machinery — Safety-related parts of control systems — Part 2: Guidance for the design and validation▷ISO/AWI TR 13849-3 Safety of machinery — Safety-related parts of control systems — Part 3: Markov model-based PFH calculation▷ISO/FDIS 13855 Safety of machinery — Positioning of safeguards with respect to the approach of the human body▷ISO/FDIS 14119 Safety of machinery — Interlocking devices associated with guards — Principles for design and selection▷ISO/AWI 14122-1 Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means of access between two levels▷ISO/AWI 14159 Safety of machinery — Hygiene requirements for the design of machinery▷ISO/CD TR 21260 Safety of machinery — Mechanical safety data for physical contacts between moving machinery or moving parts of machinery and persons
-
[특집-기술위원회] TC 178 - 리프트·에스컬레이터·무빙워크(Lifts·escalators·moving walks)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 등이 있다.ISO/TC 178 리프트, 에스컬레이터, 무빙워크(Lifts, escalators and moving walks)와 관련된 기술위원회는 TC 176과 마찬가지로 1979년 결성됐다. 사무국은 프랑스 표준화기구(Association Française de Normalization, AFNOR)에서 맡고 있다.위원회는 에바 콘티발(Mme Eva Contival)가 책임지고 있으며 현재 의장은 게로 그슈벤트너(Dr Gero Gschwendtner)다. ISO 기술 프로그램 관리자는 안나 카테리나 로시(Dr Anna Caterina Rossi), ISO 편집 관리자는 마사 카산토산(Mrs Martha Casantosan) 등으로 조사됐다.범위는 리프트, 서비스 리프트, 승객용 컨베이어, 유사 장치 등의 안전을 포함해 모든 사양의 표준화다. 단 지속적인 기계적 취급 장비 및 광산 리프트는 제외한다.현재 ISO/TC 178 사무국의 직접적인 책임 하에 발행된 표준은 43개며 ISO/TC 178 사무국의 직접적인 책임 하에 개발 중인 표준은 15개다. 참여하고 있는 회원은 31개국, 참관 회원은 27개국이다.□ ISO/TC 178 사무국의 직접적인 책임 하에 발행된 표준 43개 중 15개 목록▷ISO 4190-2:2001 Lift (US: Elevator) installation — Part 2: Class IV lifts▷ISO 4190-3:1982 Passenger lift installations — Part 3: Service lifts class V▷ISO 4190-5:2006 Lift (Elevator) installation — Part 5: Control devices, signals and additional fittings▷ISO 8100-1:2019 Lifts for the transport of persons and goods — Part 1: Safety rules for the construction and installation of passenger and goods passenger lifts▷ISO 8100-2:2019 Lifts for the transport of persons and goods — Part 2: Design rules, calculations, examinations and tests of lift components▷ISO/TS 8100-3:2019 Lifts for the transport of persons and goods — Part 3: Requirements from other Standards (ASME A17.1/CSA B44 and JIS A 4307-1/JIS A 4307-2) not included in ISO 8100-1 or ISO 8100-2▷ISO 8100-20:2018 Lifts for the transport of persons and goods — Part 20: Global essential safety requirements (GESRs)▷ISO/TS 8100-21:2018 Lifts for the transport of persons and goods — Part 21: Global safety parameters (GSPs) meeting the global essential safety requirements (GESRs)▷ISO/TR 8100-24:2016 Safety requirements for lifts (elevators) — Part 24: Convergence of lift requirements▷ISO 8100-30:2019 Lifts for the transport of persons and goods — Part 30: Class I, II, III and VI lifts installation▷ISO 8100-32:2020 Lifts for the transportation of persons and goods — Part 32: Planning and selection of passenger lifts to be installed in office, hotel and residential buildings▷ISO 8100-33:2022 Lifts for the transport of persons and goods — Part 33: T-type guide rails for lift cars and counterweights▷ISO 8100-34:2021 Lifts for the transport of persons and goods — Part 34: Measurement of lift ride quality▷ISO 8102-1:2020 Electrical requirements for lifts, escalators and moving walks — Part 1: Electromagnetic compatibility with regard to emission▷ISO 8102-2:2021 Electrical requirements for lifts, escalators and moving walks — Part 2: Electromagnetic compatibility with regard to immunity□ ISO/TC 178 사무국의 직접적인 책임 하에 개발 중인 표준 15개 목록▷ISO/DIS 8100-1 Lifts for the transport of persons and goods — Part 1: Safety rules for the construction and installation of passenger and goods passenger lifts▷ISO/DIS 8100-2 Lifts for the transport of persons and goods — Part 2: Design rules, calculations, examinations and tests of lift components▷ISO/AWI 8100-7 Lifts for the transport of persons and goods — Part 7: Accessibility to lifts for persons including persons with disability▷ISO/WD TS 8100-10 Lifts for the transport of persons and goods — Part 10: Building Information Modelling▷ISO/CD TS 8100-22 Lifts for the transport of persons and goods — Part 22: Prerequisites for certification of conformity of lift systems, lift components and lift functions within conformity assessment procedures▷ISO/CD TS 8100-23 Lifts for the transport of persons and goods — Part 23: Certification and accreditation requirements within conformity assessment procedures▷ISO/CD TR 8101-10 Fire safety on lifts — Part 10: Comparison of worldwide safety standards on lifts for firefighters▷ISO/AWI 8102-1 Electrical requirements for lifts, escalators and moving walks — Part 1: Electromagnetic compatibility with regard to emissions▷ISO/AWI 8102-2 Electrical requirements for lifts, escalators and moving walks — Part 2: Electromagnetic compatibility with regard to immunity▷ISO/WD TS 8102-21 Electrical requirements for lifts, escalators and moving walks — Part 21: Part 21: On-site and off-site software updates▷ISO/DIS 8103-1 Escalators and moving walks — Part 1: Safety requirements▷ISO/WD TS 8103-3 Escalators and moving walks — Part 3: Part 3: Requirements from other Standards (ASME A17.1/CSA B44 and JIS codes) not included in ISO▷ISO/AWI 8103-9 Escalators and moving walks — Part 9: Measurement of ride quality▷ISO/DTR 25741-1 Lifts and escalators subject to seismic conditions — Compilation report — Part 1: Rule by rule comparison▷ISO/DTR 25741-2 Lifts and escalators subject to seismic conditions — Compilation report — Part 2: Abbreviated comparison and comments
-
[특집-기술위원회] TC 174 - 보석 및 귀금속(Jewellery and precious metals)… 번호 부여 시스템, 반지 크기, 귀금속 색상 및 코팅, 다이아몬드 등 주얼리스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 등도 포함된다.ISO/TC 174 보석 및 귀금속(Jewellery and precious metals)과 관련된 기술위원회는 TC 171, TC 172, TC 173과 마찬가지로 1978년 결성됐다. 사무국은 독일 표준화기구(Deutsches Institut für Normung e.V., DIN)에서 맡고 있다.위원회는 페트라 비쇼프((FH) Petra Bischoff)가 책임지고 있으며 현재 의장은 조나단 조드리(Mr Jonathan Jodry)이며 임기는 2024년까지다.ISO 기술 프로그램 관리자는 블란딘 가르시아(Mme Blandine Garcia), ISO 편집 관리자는 빈센조 바주치(M Vincenzo Bazzucchi) 등으로 조사됐다.범위는 번호 부여 시스템, 반지 크기, 귀금속 색상 및 코팅, 다이아몬드 등 주얼리 분야와 분석, 샘플링, 불순물 등 귀금속 분야 표준화다.현재 ISO/TC 174 사무국의 직접적인 책임 하에 발행된 표준은 21개며 ISO/TC 173 사무국의 직접적인 책임 하에 개발 중인 표준은 10개다. 참여하고 있는 회원은 19개국, 참관 회원은 25개국이다.□ ISO/TC 174 사무국의 직접적인 책임 하에 발행된 표준 21개 중 15개 목록▷ISO 5724:2023 Jewellery and precious metals — Determination of very high purity gold — Difference method using ICP-MS▷ISO 8653:2016 Jewellery — Ring-sizes — Definition, measurement and designation▷ISO 8654:2018 Jewellery — Colours of gold alloys — Definition, range of colours and designation▷ISO 8654:2018/Amd 1:2019 Jewellery — Colours of gold alloys — Definition, range of colours and designation — Amendment 1▷ISO 9202:2019 Jewellery and precious metals — Fineness of precious metal alloys▷ISO 10713:1992 Jewellery — Gold alloy coatings▷ISO 11210:2023 Jewellery and precious metals — Determination of platinum — Gravimetry using ammonium chloride▷ISO 11426:2021 Jewellery and precious metals — Determination of gold — Cupellation method (fire assay)▷ISO 11427:2014 Jewellery — Determination of silver in silver jewellery alloys — Volumetric (potentiometric) method using potassium bromide▷ISO 11490:2023 Jewellery and precious metals — Determination of palladium — Gravimetry using dimethylglyoxime▷ISO 11494:2019 Jewellery and precious metals — Determination of platinum in platinum alloys — ICP-OES method using an internal standard element▷ISO 11495:2019 Jewellery and precious metals — Determination of palladium in palladium alloys — ICP-OES method using an internal standard element▷ISO 11596:2021 Jewellery and precious metals — Sampling of precious metals and precious metal alloys▷ISO 13756:2015 Jewellery — Determination of silver in silver jewellery alloys — Volumetric (potentiometric) method using sodium chloride or potassium chloride▷ISO 15093:2020 Jewellery and precious metals — Determination of high purity gold, platinum and palladium — Difference method using ICP-OES□ ISO/TC 174 사무국의 직접적인 책임 하에 개발 중인 표준 10개 목록▷ISO/PRF 6893 Jewellery and precious metals — Inspection of batches of small diamonds — Terminology, classification and test methods▷ISO/DIS 10713 Jewellery and precious metals — Gold alloy coatings▷ISO/PRF 11427 Jewellery and precious metals — Determination of silver — Potentiometry using potassium bromide▷ISO/PRF 13756 Jewellery and precious metals — Determination of silver — Potentiometry using sodium chloride or potassium chloride▷ISO/DIS 18214 Jewellery and precious metals — Determination of high purity gold, silver, platinum and palladium — Difference method using SPARK-OES▷ISO/AWI 19376-1 Jewellery and precious metals — Vocabulary — Part 1: Precious metals and units▷ISO/CD 19919 Jewellery and precious metals — Determination of silver — ICP-OES method using an internal standard element▷ISO/AWI 21261-1 Jewellery and precious metals — Responsible precious metals — Part 1: General requirements for responsible precious metals▷ISO/AWI 21261-2 Jewellery and precious metals — Responsible precious metals — Part 2: Minimum rules and procedures for conformity assessment schemes▷ISO/AWI 21261-3 Jewellery and precious metals — Responsible precious metals — Part 3: Requirements for recycled gold
-
[특집-기술위원회] TC 173 - 보조 용품(Assistive products)… 개인의 줄어든 능력을 보정하는데 도움을 주기 위한 보조 용품 및 관련 서비스스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 등도 포함된다.ISO/TC 173 보조 용품(Assistive products)과 관련된 기술위원회는 TC 171, TC 172와 마찬가지로 1978년 결성됐다. 사무국은 스웨덴 표준연구소(Swedish Institute for Standards, SIS)에서 맡고 있다.위원회는 조아킴 포크(Mr Joakim Falk)가 책임지고 있으며 현재 의장은 마리타 브런딘(Ms Marita Brundin)이며 임기는 2025년까지다. ISO 기술 프로그램 관리자는 마호 타카하시(Mme Maho Takahashi), ISO 편집 관리자는 발레리아 아가멤논(Ms Valeria Agamennone) 등으로 조사됐다.범위는 개인의 줄어든 능력을 보정하는데 도움을 주기 위한 보조 용품 및 관련 서비스 분야의 표준화다. 단 기타 기술위원회 및 시스템위원회에서 다루고 있는 보조용품들은 제외한다.교통 수단(ISO/TC 8, 20, 22), 건물 건축(ISO/TC 59), 가구(ISO/TC 136), 수술용 임플란트(ISO/TC 150), 보철물 및 교정 장치(ISO/TC 150)에 대한 접근 /TC 168), 광학 및 포토닉스(ISO/TC 172), 전기 안전(IEC/TC 62), 보청기(IEC/TC 29), ICT 기술(JTC 1) 및 인체공학에서 다루는 설계 원리(ISO/TC 159) 및 적극적 생활 지원(IEC SyCAAL) 등이 포함된다.현재 ISO/TC 173 사무국과 관련해 발행된 표준은 95개며 이 중 ISO/TC 173 사무국의 직접적인 책임 하에 발행된 표준은 24개다.ISO/TC 173 사무국과 관련해 개발 중인 표준은 22개며 ISO/TC 173 사무국의 직접적인 책임 하에 개발 중인 표준은 11개다. 참여하고 있는 회원은 26개국, 참관 회원은 29개국이다.□ ISO/TC 173 사무국의 직접적인 책임 하에 발행된 표준 24개 중 15개 목록▷ISO 10535:2021 Assistive products — Hoists for the transfer of persons — Requirements and test methods▷ISO 11199-1:2021 Assistive products for walking manipulated by both arms — Requirements and test methods — Part 1: Walking frames▷ISO 11199-2:2021 Assistive products for walking manipulated by both arms — Requirements and test methods — Part 2: Rollators▷ISO 11199-3:2005 Walking aids manipulated by both arms — Requirements and test methods — Part 3: Walking tables▷ISO 11334-1:2007 Assistive products for walking manipulated by one arm — Requirements and test methods — Part 1: Elbow crutches▷ISO 11334-4:1999 Walking aids manipulated by one arm — Requirements and test methods — Part 4: Walking sticks with three or more legs▷ISO/TR 11548-1:2001 Communication aids for blind persons — Identifiers, names and assignation to coded character sets for 8-dot Braille characters — Part 1: General guidelines for Braille identifiers and shift marks▷ISO/TR 11548-2:2001 Communication aids for blind persons — Identifiers, names and assignation to coded character sets for 8-dot Braille characters — Part 2: Latin alphabet based character sets▷ISO 17966:2016 Assistive products for personal hygiene that support users — Requirements and test methods▷ISO 19894:2019 Walking trolleys — Requirements and test methods▷ISO 20342-1:2022 Assistive products for tissue integrity when lying down — Part 1: General requirements▷ISO/TR 20342-7:2021 Assistive products for tissue integrity when lying down — Part 7: Foam properties, characteristics and performance▷ISO/TS 20342-10:2022 Assistive products for tissue integrity when lying down — Part 10: Guidance to cleaning, disinfecting and care of polyurethane APTI covers▷ISO 21801-1:2020 Cognitive accessibility — Part 1: General guidelines▷ISO 21801-2:2022 Cognitive accessibility — Part 2: Reporting□ ISO/TC 173 사무국의 직접적인 책임 하에 개발 중인 표준 11개 목록▷ISO 11199-2:2021/DAmd 1 Assistive products for walking manipulated by both arms — Requirements and test methods — Part 2: Rollators — Amendment 1: Eliminate brake requirements in 6.5 Structure requirements▷ISO/DIS 11334-4 Assistive products for walking, manipulated by one arm — Requirements and test methods — Part 4: Walking sticks with three or more legs▷ISO/CD 17966 Assistive products for toileting, bathing and showering — Requirements and test methods▷ISO/AWI TR 20342-2 Assistive products for tissue integrity when lying down — Part 2: Microclimate▷ISO/CD 20342-3 Assistive products for tissue integrity when lying down — Part 3: Strength and impact▷ISO/CD 20342-4 Assistive products for tissue integrity when lying down — Part 4: Durability▷ISO/DIS 20342-5 Assistive products for tissue integrity when lying down — Part 5: Resistance to cleaning and disinfection▷ISO/AWI 20342-6 Assistive products for tissue integrity when lying down — Part 6: Horizontal stiffness▷ISO/CD 20342-8 Assistive products for tissue integrity when lying down — Part 8: Pressure distribution▷IEC/DIS 80601-2-52 Medical electrical equipment — Part 2-52: Particular requirements for the basic safety and essential performance of medical beds▷IEC/DIS 80601-2-89 Medical electrical equipment — Part 2-89: Particular requirements for the basic safety and essential performance of medical beds for children□ ISO/TC 173 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 173/SC 1 Wheelchairs ; 발행된 표준 41개, 개발 중인 표준 6개▷ISO/TC 173/SC 2 Classification and terminology ; 발행된 표준 1개, 개발 중인 표준 0개▷ISO/TC 173/SC 3 Aids for ostomy and incontinence ; 발행된 표준 23개, 개발 중인 표준 4개▷ISO/TC 173/SC 7 Assistive products for persons with impaired sensory functions ; 발행된 표준 6개, 개발 중인 표준 1개
-
[기획-디지털 ID 법률] 7. 미국 유타주의 블록체인 디지털 ID 관련 법률 제정2023년 4월12일 미국 유타주지사(Utah governor) 스펜서 콕스(Spencer Cox)는 블록체인 디지털 ID 파일럿 법안에 서명했다.콕스 주지사가 서명한 법안은 디지털 기술 태스크 포스(Digital Technology Task Force) 법안 HB 357이다. 유타주 기술 서비스부(Division of Technology Services, DTS)가 디지털 검증 가능한 자격증명에 대한 파일럿 프로그램을 시작하도록 요구하는 법안이다.HB 470로 명명된 블록체인 디지털 ID 파일럿 법안에 따르면 기관은 분산원장 기술(distributed-ledger technology)을 통해 디지털 ID 또는 기타 기록을 발행하는 방법에 관해 정부기관에 권장 사항을 제공해야 된다.또한 DTS는 프로젝트가 시작된 후 2023년 10월 말까지 유타주 하원의 공공시설, 에너지, 기술 임시위원회에 디지털 기록의 진행 상황을 보고하도록 했다.유타주는 디지털 ID를 개발한 최초의 주와는 거리가 멀지만 블록체인 실험을 통해 다른 주와 차별화할 수 있을 것으로 판단하고 있다.참고로 콜로라도주는 2019년 앱 기반 디지털 운전면허증을 출시했다. 애리조나주는 2022년 애플 스마트폰 사용자가 디지털 ID를 저장해 사용하도록 기술을 개발했다.
-
[특집-기술위원회] TC 163 - 건축환경의 열 성능 및 에너지 사용(Thermal performance and energy use in the built environment)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.△1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 등도 포함된다.ISO/TC 163 건축환경의 열 성능 및 에너지 사용(Thermal performance and energy use in the built environment)과 관련된 기술위원회는 TC 162와 마찬가지로 1975년 결성됐다. 사무국은 스웨덴 표준협회(Swedish Institute for Standards, SIS)에서 맡고 있다.위원회는 벵트 리드슈테트(Mr Bengt Rydstedt)가 책임지고 있으며 현재 의장은 예스퍼 아르프비드손(Mr Jesper Arfvidsson)다. ISO 기술 프로그램 관리자는 안나 카테리나 로시(Dr Anna Caterina Rossi), ISO 편집 관리자는 클라우디아 루에제(Ms Claudia Lueje) 등으로 조사됐다. 범위는 다음과 같은 건축 및 토목 공학 작업 분야의 표준화다. - 신축 및 기존 건물 전체를 포함한 재료, 제품, 부품, 요소 및 시스템의 열 및 습열 성능과 기술 건물 시스템과의 상호 작용 - 건물에 설치된 장비의 단열을 포함해 건축 및 산업용 단열재, 제품 및 시스템 - 열 및 습기 전달, 온도 및 습기 조건에 대한 테스트 및 계산 방법 - 산업 건축 환경을 포함한 건물의 에너지 사용에 대한 테스트 및 계산 방법 - 건물의 냉난방 부하에 대한 테스트 및 계산 방법 - 일광, 환기 및 공기 침투에 대한 테스트 및 계산 방법 - 건물 및 건물 구성요소의 열, 습열 및 에너지 성능에 대한 현장 테스트 방법, 기후 데이터를 포함한 계산을 위한 입력 데이터 - 관련 테스트 방법 및 적합성 기준이 포함된 단열재, 제품 및 시스템 사양 - 용어 - ISO 내 열 및 습열 성능에 대한 작업의 일반적인 검토 및 조정단, 건축 환경 설계(ISO/TC 205), 새로운 건물 및 개조 설계에 적용하기 위한 건물 환경 장비의 성능을 테스트하고 평가하는 방법(ISO/TC 205), 일광, 환기 및 공기 침투를 위한 설계 방법 및 기준(ISO/TC 205) 등은 제외한다.ISO/TC163/WG4 공동 작업 그룹 'TC 163 및 TC 205 에너지 성능'을 통해 ISO/TC 205와의 긴밀한 협력을 통해 건물 개조뿐 아니라 신규 건물과 기존 건물의 에너지 성능에 대한 전체적인 평가를 표준화하고 있다.ISO/TC163/WG4 공동 작업 그룹은 용어 및 정의, 건물 및 기술 시스템의 시스템 경계, 다음을 고려한 건물의 전반적인 에너지 성능 평가 등을 표준화한다. - 건축 요소의 에너지 성능 - 건물 관련 시스템(난방, 냉방, 가정용 온수, 환기, 조명, 시스템 제어, 운송 및 기타 에너지 관련 시스템) - 실내 및 실외 조건 - 지역 에너지 생산(현장 및 지역 수준) - (사용) 에너지원(재생 가능 포함) - 건물 시운전 - 전반적인 에너지 효율 평가 - 건축물의 에너지성능을 표현하는 수단 및 에너지성능 인증 등현재 ISO/TC 163 사무국과 관련해 발행된 표준은 152개며 이중 사무국의 직접적인 책임 하에 발행된 표준은 15개다. ISO/TC 16 사무국과 관련해 개발 중인 표준은 15개며 참여하고 있는 회원은 29개국, 참관 회원은 35개국이다.□ ISO/TC 163 사무국의 직접적인 책임 하에 발행된 표준 15개 목록▷ISO 7345:2018 Thermal performance of buildings and building components — Physical quantities and definitions▷ISO 9229:2020 Thermal insulation — Vocabulary▷ISO 9251:1987 Thermal insulation — Heat transfer conditions and properties of materials — Vocabulary▷ISO 9288:2022 Thermal insulation — Heat transfer by radiation — Vocabulary▷ISO 9346:2007 Hygrothermal performance of buildings and building materials — Physical quantities for mass transfer — Vocabulary▷ISO 12655:2013 Energy performance of buildings — Presentation of measured energy use of buildings▷ISO 17772-1:2017 Energy performance of buildings — Indoor environmental quality — Part 1: Indoor environmental input parameters for the design and assessment of energy performance of buildings▷ISO/TR 17772-2:2018 Energy performance of buildings — Overall energy performance assessment procedures — Part 2: Guideline for using indoor environmental input parameters for the design and assessment of energy performance of buildings▷ISO 18523-1:2016 Energy performance of buildings — Schedule and condition of building, zone and space usage for energy calculation — Part 1: Non-residential buildings▷ISO 18523-2:2018 Energy performance of buildings — Schedule and condition of building, zone and space usage for energy calculation — Part 2: Residential buildings▷ISO 52000-1:2017 Energy performance of buildings — Overarching EPB assessment — Part 1: General framework and procedures▷ISO/TR 52000-2:2017 Energy performance of buildings — Overarching EPB assessment — Part 2: Explanation and justification of ISO 52000-1▷ISO 52000-3:2023 Energy performance of buildings — Overarching EPB assessment — Part 3: General principles for determination and reporting of primary energy factors (PEF) and CO2 emission coefficients▷ISO 52003-1:2017 Energy performance of buildings — Indicators, requirements, ratings and certificates — Part 1: General aspects and application to the overall energy performance▷ISO/TR 52003-2:2017 Energy performance of buildings — Indicators, requirements, ratings and certificates — Part 2: Explanation and justification of ISO 52003-1□ ISO/TC 163 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 163/SC 1 Test and measurement methods ; 발행된 표준 76개, 개발 중인 표준 4개▷ISO/TC 163/SC 2 Calculation methods ; 발행된 표준 40개, 개발 중인 표준 3개▷ISO/TC 163/SC 3 Thermal insulation products, components and systems ; 발행된 표준 21개, 개발 중인 표준 8개
-
[특집-기술위원회] TC 160 - 건물 유리(Glass in building)… 영국 표준협회(BSI)가 사무국 운영스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.△1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 등도 포함된다.ISO/TC 160 건물 유리(Glass in building)와 관련된 기술위원회는 TC 156, TC 157, TC 158, TC 159와 마찬가지로 1974년 결성됐다. 사무국은 영국 표준협회(British Standards Institution, BSI)에서 맡고 있다.위원회는 톰 스택(Mr Tom Stack)이 책임지고 있으며 현재 의장은 노버트 브룩(Mr Dr Norbert Wruk)이다. ISO 기술 프로그램 관리자는 안나 카테리나 로시(Dr Anna Caterina Rossi), ISO 편집 관리자는 발레리아 아가넨노네(Ms Valeria Agamennone) 등으로 조사됐다.범위는 용어, 성능 요구사항, 계산 및 테스트 방법, 설계 및 시공 규칙, 치수 특성을 포함한 재료의 분류 및 사양을 포함한 건물 유리 분야의 표준화다.현재 ISO/TC 160 사무국의 직접적인 책임 하에 발행된 표준은 58개며 ISO/TC 160 사무국의 직접적인 책임 하에 개발 중인 표준은 10개다. 참여하고 있는 회원은 22개국, 참관 회원은 30개국이다.□ ISO/TC 160 사무국의 직접적인 책임 하에 발행된 표준 58개 중 15개 목록▷ISO 1288-1:2016 Glass in building — Determination of the bending strength of glass — Part 1: Fundamentals of testing glass▷ISO 1288-2:2016 Glass in building — Determination of the bending strength of glass — Part 2: Coaxial double-ring test on flat specimens with large test surface areas▷ISO 1288-3:2016 Glass in building — Determination of the bending strength of glass — Part 3: Test with specimen supported at two points (four point bending)▷ISO 1288-4:2016 Glass in building — Determination of the bending strength of glass — Part 4: Testing of channel shaped glass▷ISO 1288-5:2016 Glass in building — Determination of the bending strength of glass — Part 5: Coaxial double ring test on flat specimens with small test surface areas▷ISO 9050:2003 Glass in building — Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors▷ISO 10291:1994 Glass in building — Determination of steady-state U values (thermal transmittance) of multiple glazing — Guarded hot plate method▷ISO 10292:1994 Glass in building — Calculation of steady-state U values (thermal transmittance) of multiple glazing▷ISO 10293:1997 Glass in building — Determination of steady-state U values (thermal transmittance) of multiple glazing — Heat flow meter method▷ISO 11479-1:2011 Glass in building — Coated glass — Part 1: Physical defects▷ISO 11479-2:2011 Glass in building — Coated glass — Part 2: Colour of façade▷ISO 11485-1:2011 Glass in building — Curved glass — Part 1: Terminology and definitions▷ISO 11485-2:2011 Glass in building — Curved glass — Part 2: Quality requirements▷ISO 11485-3:2014 Glass in building — Curved glass — Part 3: Requirements for curved tempered and curved laminated safety glass▷ISO 12540:2017 Glass in building — Tempered soda lime silicate safety glass □ ISO/TC 160 사무국의 직접적인 책임 하에 개발 중인 표준 10개 목록▷ISO/CD 16293-2 Glass in building — Basic soda lime silicate glass products — Part 2: Float glass▷ISO/CD 18178 Glass in building — Laminated solar photovoltaic glass for use in buildings▷ISO/CD 19916-4 Glass in building — Vacuum insulating glass — Part 4: Pendulum impact testing and classification of safety glass▷ISO/DIS 20492-1 Glass in buildings - Insulating glass — Part 1: Durability of edge seals by climate tests▷ISO/DIS 20492-2 Glass in buildings - Insulating glass — Part 2: Chemical fogging tests▷ISO/DIS 20492-3 Glass in buildings — Insulating glass — Part 3: Gas concentration and gas leakage▷ISO/DIS 20492-4 Glass in buildings — Insulating glass — Part 4: Methods of test for the physical attributes of edge seals▷ISO/CD 28278-1 Glass in building — Glass products for structural sealant glazing — Part 1: Supported and unsupported monolithic and multiple glazing▷ISO/CD 28278-2 Glass in building — Glass products for structural sealant glazing — Part 2: Assembly rules▷IEC/AWI 63092-3 Photovoltaics in buildings — Part 3: Evaluation methodology of SHGC for Building integrated photovoltaic modules with various designs
-
[특집-기술위원회] TC 154 - 상업, 산업 및 행정 분야 프로세스, 데이터 요소 및 문서(Processes, data elements and documents in commerce, industry and administration)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다. 기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다. ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다. 1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다. 이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 등이다. △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104, △1962년 TC 105~TC 107, △1963년 TC 108~TC 111, △1964년 TC 112~TC 115, TC 117, △1965년 TC 118, △1966년 TC 119~TC 122, △1967년 TC 123, △1968년 TC 126, TC 127, △1969년 TC 130~136, △1970년 TC 137, TC 138, TC 142, TC 145, △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 등도 포함된다. ISO/TC 154 상업, 산업 및 행정 분야 프로세스, 데이터 요소 및 문서(Processes, data elements and documents in commerce, industry and administration)와 관련된 기술위원회는 1972년 결성됐다. 사무국은 중국 국가표준화관리위원회(国家标准化管理委员会, Standardization Administration of the P. R. C, SAC))에서 맡고 있다. 위원회는 장 지안팡(Mr Jianfang Zhang)이 책임지고 있다. 현재 의장은 유 시(Mr Yu Shi)로 임기는 2024년까지다. ISO 기술 프로그램 관리자는 로라 매튜(Ms Laura Mathew), ISO 편집 관리자는 이본느 헨(Mrs Yvonne Chen) 등으로 조사됐다. 범위는 비즈니스, 행정 프로세스의 국제 표준화 및 등록이다. 또한 개별 조직 내 및 조직간 정보 교환에 사용되는 지원 데이터의 국제 표준화 및 등록, 산업 데이터 분야의 표준화 활동을 지원한다. 다음과 같은 애플리케이션별 메타 표준 개발 및 유지 관리도 포함된다. △프로세스 사양(다른 기술위원회의 개발이 없는 경우) △콘텐츠가 포함된 데이터 사양 △양식 레이아웃(종이/전자) △표준 개발 및 유지 관리 △프로세스 식별(다른 기술위원회의 개발이 없는 경우) △데이터 식별 △EDIFACT 구문의 유지 관리 현재 ISO/TC 154 사무국의 직접적인 책임 하에 발행된 표준은 37개며 SO/TC 154 사무국의 직접적인 책임 하에 개발 중인 표준은 7개다. 참여하고 있는 회원은 17개국, 참관 회원은 28개국이다. □ ISO/TC 154 사무국의 직접적인 책임 하에 발행된 표준 37개 중 15개 목록 ▷ISO 5054-1:2023 Specification for an enterprise canonical model — Part 1: Architecture ▷ISO 6422-1:2010 Layout key for trade documents — Part 1: Paper-based documents ▷ISO 7372:2005 Trade data interchange — Trade data elements directory ▷ISO 8439:1990 Forms design — Basic layout ▷ISO 8440:1986 Location of codes in trade documents ▷ISO 8440:1986/Cor 1:2000 Location of codes in trade documents — Technical Corrigendum 1 ▷ISO 8601-1:2019 Date and time — Representations for information interchange — Part 1: Basic rules ▷ISO 8601-1:2019/Amd 1:2022 Date and time — Representations for information interchange — Part 1: Basic rules — Amendment 1: Technical corrections ▷ISO 8601-2:2019 Date and time — Representations for information interchange — Part 2: Extensions ▷ISO 9735-1:2002 Electronic data interchange for administration, commerce and transport (EDIFACT) — Application level syntax rules (Syntax version number: 4, Syntax release number: 1) — Part 1: Syntax rules common to all parts ▷ISO 9735-2:2002 Electronic data interchange for administration, commerce and transport (EDIFACT) — Application level syntax rules (Syntax version number: 4, Syntax release number: 1) — Part 2: Syntax rules specific to batch EDI ▷ISO 9735-3:2002 Electronic data interchange for administration, commerce and transport (EDIFACT) — Application level syntax rules (Syntax version number: 4, Syntax release number: 1) — Part 3: Syntax rules specific to interactive EDI ▷ISO 9735-4:2002 Electronic data interchange for administration, commerce and transport (EDIFACT) — Application level syntax rules (Syntax version number: 4, Syntax release number: 1) — Part 4: Syntax and service report message for batch EDI (message type — CONTRL) ▷ISO 9735-5:2002 Electronic data interchange for administration, commerce and transport (EDIFACT) — Application level syntax rules (Syntax version number: 4, Syntax release number: 1) — Part 5: Security rules for batch EDI (authenticity, integrity and non-repudiation of origin) ▷ISO 9735-6:2002 Electronic data interchange for administration, commerce and transport (EDIFACT) — Application level syntax rules (Syntax version number: 4, Syntax release number: 1) — Part 6: Secure authentication and acknowledgement message (message type - AUTACK) □ ISO/TC 154 사무국의 직접적인 책임 하에 개발 중인 표준 7개 목록 ▷ISO/WD 5909 Data interchange processes of blockchain based negotiable maritime bill of lading related to e-Commerce platform ▷ISO/AWI 7372 Trade data interchange — Trade data elements directory ▷ISO 8601-2:2019/DAmd 1 Date and time — Representations for information interchange — Part 2: Extensions — Amendment 1 ▷ISO/AWI 14533-3 Processes, data elements and documents in commerce, industry and administration — Long term signature profiles — Part 3: Long term signature profiles for PDF Advanced Electronic Signatures (PAdES) ▷ISO/WD TR 19626-3 Processes, data elements and documents in commerce, industry and administration —Trusted communication platforms for electronic documents — Part 3: Blockchain-based implementation guideline ▷ISO/DIS 20197-1 Buy-Ship-Pay Reference Data Model — Part 1: Business Requirement Specification (BRS) ▷ISO/DIS 23355 Visibility data interchange between logistics information service providers